How to Clean After Construction | Complete Guide for a Shining New Space

by ARIA Commercial Cleaning Services

How to clean after construction - a hard hat resting on surface.

Done with the construction project of your workspace or home?

You can't wait any longer to kick up your shoes and enjoy the renovated space. There's lots of mess and a cloud of dust for post-renovation cleaning before you can jump in your chair.

You're here looking for how to clean after construction and we're going to keep it a super easy guide for you.

So before you sit back and relax, your space needs some residential post-construction cleaning.

This complete guide to post renovation cleaning will cover:

  • Steps to Post-construction cleaning.
  • Checklist for house cleaning after construction.
  • Why do you need professionals for post-renovation cleaning?

It's time to put on your learner's cap and let this guide to residential post-construction cleaning help you out!

How to clean after construction? A Step-by-step Process

Post-renovation cleaning is a step-by-step process, and going through these steps makes it quicker and easier for you. Here we go.

Getting started with the post renovation cleaning

If you're planning over to 'do-it-yourself', you are going to need a long list of supplies necessary for residential post-construction cleaning. Here is the listicle of the items we professionals use for house cleaning after construction.

Check this out:

  • Push Brooms and firm-bristled brush
  • Trash bags
  • Dustpan
  • Dust masks
  • Vacuum
  • Hoses
  • Mop and bucket
  • Upholstery articles
  • Cleaning rags
  • Mop heads
  • Microfiber cloths and dusters
  • Scrub pads and brushes
  • Masking or painter’s tape
  • Rubber gloves
  • Putty knife
  • Ladder bumpers
  • Dish soap or all-purpose cleaner
  • Industrial cleaning bins
  • White vinegar
  • Squeegee
  • Rubber blades
  • Hydrogen peroxide
  • Step ladders
  • Supplies for cleaning the carpets
  • Floor polisher
  • Extension ladders
  • Power washers
  • Eye protection
  • Safety signs
  • Window cleaning solution
  • Plastic sheeting
  • Other necessary chemicals

This list is not meant to overwhelm you but to make your residential post-construction cleaning a safe and efficient project.

But you get the job done with no hassles and that too at an affordable post-renovation cleaning price when you hire professionals like us to do our job.

The first step professionals take before actually beginning the cleaning work is to organize the phases in which the cleaning job is completed. While doing the cleaning work, you might accidentally walk across the dusty areas and again you have to waste your time re-cleaning it, and this is why organizing makes it more efficient. The cleaning activity is generally done in the order of in to out, and from up to down as it reduces the mess.

If you can get your space free from dust before starting the cleaning, your final tasks are going to be easier, and moreover, it prevents dust from causing breathing problems. There might also be areas at the site that remain untouched from the construction activities so they need to be sealed off using plastic sheeting. The walls and the doors in the room are secured with plastic using masking tape( painter's tape). To protect your HVAC system, block the openings and vents using plastic sheeting.

1. Removal of debris

Just after the workers have left the site after the construction project, all the place is covered with lumber, garbage, and dust. What a mess, isn't it? And if you're straightway going to worry about how to remove dust from home after construction, it's still a bit early for this step, because first, we have to take care of the big trash leftover from the place.

Take a quick look at both the exterior and interior areas by walking across and be prepared to collect a lot of trash including hazardous material and construction supplies. You have to do it very carefully as you can't afford your team to get injured in the clean-up.

The safety concerns of whomever you're taking help for your post renovation cleaning are another reason most people leave it upon the professionals to take care of the cleaning needs. For the rough cleaning, you have to plan beforehand where you are going to dispose of the rough waste.

However, if you don't want to go through these hassles at every step, you can allow us to do our job because we have the requisite equipment, experience, and skilled workers to finish the job quickly. This way, you can move in sooner into your complex.

2. Cleaning hard floors

The next challenge is how to clean floors after construction and for that, a little inspection needs to be done. Even if it's an overwhelming mess, you don't have to worry because it can be cleaned. If the floor wasn't properly covered, it could have primers on it or coarse particles. So you can't go straightway with the mop.

First, you have to do vacuuming or sweeping if you have a hard surface floor. This is to avoid fine particles or grit from scratching your floor as they can act like sandpaper.

Another to remember is to switch off the beater bar if you are vacuuming with a beater bar. You can use a damp mop to clean up the floor after the floor dust has been collected. Use appropriate clean which goes with the material of the surface to mop.

3. Cleaning carpet after renovation

Carpets are one of the areas that trap a lot of dust and dirt in them during the renovation of your house. But if you're worried about how to get rid of dust after construction, know that it can be cleaned.

Dust and dirt can also get embedded inside the curtains and upholstery. It can't be allowed to settle for long as it can be uncomfortable for your staff or your family, friends.

Though deep cleaning is the recommended measure and it involves a series of steps, the first thing you gotta do is vacuuming.

While vacuuming to clean the dust, you have to be careful with the soft surfaces. The furniture cushions and the frames need to be removed and vacuumed individually. Because you can't allow even a small amount of dirt to settle in, you might have to vacuum it again.

After you've minimized the dirt through vacuuming, it's time to clean your carpet from the stains. Stains make your carpet look bad and they are brought as a result of painting works or oil works during the renovation. Since the stains are stubborn and don't get removed from vacuuming, it requires a deep clean.

Professionals use a mixture of salt, vinegar, and borax to create a paste that is applied to the stained area. It is later cleared by removing the dried paste and vacuuming.

There are more steps to deep cleaning and the process can be tiresome for you, especially without experience. It is recommended to leave the job with the experts who are meant for it to prevent any damage or change in the color of the carpet.

4. Washing walls and baseboards

During the renovation procedure, walls and baseboards are going to take a lot of beating. So much so that you can write your name on the wall through the dust with your fingers.

Since some level of scratching is unavoidable due to the tools and equipment used during construction, it becomes necessary to clean the walls. There are green cleaning products we use to scrub the walls clean so that the place looks renovated in real terms.

Baseboards can be cleaned by using a mixture of water and dishwasher detergent.

5. High-Dust cleaning

The high places and ceilings inside your compound can gather dust and debris, which can cause health problems and impact the aesthetics of the place. The problem at hand is how to get rid of dust after construction, and it is cleaned by using special equipment by professionals.

The debris accumulated at hard-to-reach places is removed by high dusting. The dust, gathered dirt, and bacteria that are hard to see are also cleaned by high dusting.

Commercial spaces, restaurants, hospitals, offices, etc. which have large buildings often use high dusting. Not only does high dusting enhance the air quality and the appearance of the building but also has many other benefits. It removes the dust, dirt, and allergens which prevent the risk of allergies and provides a healthy environment for your staff.

6. Lighting- getting the shine back

The interior lighting of the residence also gets affected by the construction work and sometimes cleaning this area is left mistakenly.

The dust and fine particles can get layered on the lights and bulbs get dirty. The layers of dust reduce the efficiency and also creates a bad smell. Before you clean the light bulbs, remember to turn the electricity supply off and use only a dry and soft cloth.

7. Windows and mirrors

Windows and mirrors can get dirty during the renovation project. Even after you scrub off the dust on your glass surfaces, a few minutes later, the glass is still spoiled with streaks. It looks awful and unappealing for you and your customers.

Here are the supplies used for cleaning glass mirrors.

  • Water
  • Vinegar
  • Microfiber cloth
  • Spray bottle
  • Rubbing alcohol is also used for stubborn stains.

The mixture of vinegar and water is sprayed on the microfiber cloth and the glass is wiped with it.

To clean the window, the materials needed are a window cleaning solution, squeegee, dry clothes, and bucket.

8. Cleaning air vents

After the major phases of your residential post-construction cleaning are done, it's time to clean up your air vents and assess the air filters. There might be a need to replace the air filters.

During the construction projects, dust mixes up with the air and reaches the ducts. Now this accumulated dust in the air vents can spread across the rest of your space and so it is important to treat the ducts and filters.

You have to remove the vent covers from the ceilings and walls, and each cover should be cleaned with warm water and soap and left to dry properly. Before you replace the vent covers you have to replace the old air filters with the new ones. It will prevent dusty air which might cause breathing issues and allergies.

9. Cleaning the cabinet, drawers, and closets

Most of the fine dust has been cleared by now but there are some areas still which have been covered by the powdery dust.

Since drawers and closets remain closed most of the time so they can be easily overlooked. But the debris and dust from the construction works can easily get inside these areas too. Any material that has been already placed in the closets can also get dirty. Take a detailed look at the drawers, closets, and cabinets, and clean these areas carefully.

10. Sidewalks and driveways

Sidewalks and driveways are some of the low maintenance areas but it's important to clean them for their curb appeal. The leftover trash from the renovation makes the sidewalks dirty and stained. It is power washed to remove the sand and dirt accumulated on the surface.

Though concrete doesn't require much maintenance it needs to be cleared with only non-corrosive cleaning material.

To give the final touch, the place may be vacuumed again and any remaining dust is wiped out.

Isn’t it a lot of mess? Let our experts at ARIA Commercial Cleaning Services handle it for you.

Collecting all the supplies, and handling it all by yourself safely? Sure, it can be a tiresome and long-drawn task for you.

Our friendly cleaning masters at ARIA Commercial Cleaning Services make the whole process quick, safe, and efficient. Whether your whole space needs to be cleaned or it’s just only a few areas that need expert cleaning, we are there to help you move into your shining new space.

Give us a call today to get a free quote or click the button below to use our form.

Get in touch now